| APPLICABLE MATERIALS | |||
| Corrugated board | E/B/C flute, thickness up to 4.5 mm | ||
| Cardboard (depending on quality), up to | 2000 gsm (thickness: 2mm) | ||
| Paper (depending on quality), min. | 80 gsm (thickness: 0.1mm) | ||
| BASIC PERFORMANCE | |||
| Max. Sheet Size | 1450 mm × 1100 mm | ||
| Min. Sheet Size | 580 mm × 500 mm | ||
| Max. Mechanical Speed | 6000 cycles/hour | ||
| Production Speed | 5000~6000 cycles/hour | ||
| Max. Cutting Pressure | 400 tons | ||
| Max. Pile Height at Feeder (incl. pallet) | 1750 mm | ||
| Max. Pile Height at Delivery (incl. pallet) | 1550 mm | ||
| DIMENSIONS & WEIGHT | |||
| Length | 10098 mm | ||
| Width | 5112 mm | ||
| Height | 2763 mm | ||
| Max. Cutting Size | 1450 mm × 1085 mm | ||
| Inner Chase Size | 1540 mm ×1145 mm | ||
| Adjustable Gripper Bite Range | 9~18mm (subject to working environment, sheet quality and operation skills, etc.) | ||
| Cutting Rule Height | 23.8 mm | ||
| ELECTRICAL | |||
| Total Power Required | 38.5 KW | ||
| Variable Speed Main Motor | 18.5 KW | ||
| Total Rated Current | 100A | ||
| Cross Section of Extended Cord | 25mm2 | ||
| Electrical Power | 400V/ 50HZ ; 460V /60 HZ | ||
| Max. Air Compressor Displacement | 1.05m3/min < Equipped by user> | ||
| Rated Pressure of Compressed Air | 8 bar | ||
| Mobile Lower Platen Adjusting Range | ±1.2 mm | ||
MAIN FEATURES
TOP FEEDER
- Manual non-stop feeding system (Automatic non-stop feeding system can be chosen as optional);
- Adjustable side blower with scale indication;
- Suction head multi direction adjustment system;
- Safety photo sensor system at feeding table;
- Main feeding table motorized side shift with centering function when it is at low position;
- Feeder head with motorized up and down adjustment;
- Self-adaptive system to adjust the height of the suction head adapted to the pile height in machine operation;
SIDE POSITIONING SECTION
- Anti-static stainless steel transport table;
- Transport belt systme with side guide and automatic tension function;
- Double sheet detector (ultrasonic double sheet detector can be chosen as optional for thin paper);
- Upper sheet pressing frame with lifting device (Automatic lifting device can be chosen as optional);
- Sheet pressing device can be adjusted as a whole to adapt to different types of paper, cardboard and corrugated board;
- Sheet feeding phase adjustment and sheet slow down device to make different types of sheet better adapt to the requirements of gripper bar bite and front gauge;
- Mechanical push and pull side guide;
DIE-CUTTING SECTION
- High strength die-cutting frame, optimized to distribute pressure evenly;
- High precision mobile platen and driver;
- Die-cutting station safety door plus electrical and mechanical safety system;
- Die chase positioning and automatic locking system, centerline system making the cutting die and stripping die centered quickly and precisely;
- Synthetic supporting plate positioning and locking system, cutting plate micro-adjustment system (automatic locking system can be chosen as optional);
- Pneumatic clutch/break and safety control system;
- Motorized pressure adjustment system (die cutting pressure detection and display system can be chosen as optional);
- Gripper bar and driving chain;
- Gripper bar chain guide rails are made of synthetic materials;
- High quality index unit and gears for gripper bars;
- Overloading protection torque limit system for gripper bars and chains;
- Photo sensor detection system when gripper bar and sheets arrive and depart;
- Left and right front lay locking blocks, separate adjustments available;
- Automatic forced lubrication system recycles fluid and is equipped with oil gauge and interruption alarm;
- Automatic main drive chain lubrication.
STRIPPING SECTION
- Center line system for quick stripping die set up and change over, upper and lower frames;
- Fully open-type upper stripping frame, and front/back micro-adjustment system for upper stripping tools;
- Push button of gripper opening is added for easy taking out the production sample at stripping section;
- Lower stripping pin system;
- Front edge waste removal system and center line system for quick setup and changeover of front edge waste stripping tool;
- Full stripping with/without lead edge waste stripping convertible by one button, no tool change, more operator friendly and safe operation;
- Safety door at stripping station; electrical and mechanical safety system.
DELIVERY SECTION
- Delivery lifting table and pile pallet;
- Delivery slow down brush;
- Non-stop auxiliary delivery table;
- Electrical batch counter and tape inserter;
- Front jogger device;
- Motorized side joggers;
- Motorized delivery back gauge and sheet tail supporting device;
- Safety door at delivery section; electrical and mechanical safety system.
ELECTRICALS
- Main motor and variable frequency control system
- Touch screen and control panel;
- PLC system to control machine running and trouble monitoring;
- CE standard electrical components and circuit;
- PLC remote monitoring system (Optional).
